Next we'll add the pump and a few more things to the truck.
We'll focus on the pump for a little bit..
1)When attaching the pump to the chassis, you'll see a small line seperating the pump outline and the cab outline, this would be the frame. Place the frame about 3 notches from the bottom of the cab so that the pump is symetrical.
2)You'll notice there are two crosslays, or as I call them Pre-Connects in the tray, you can color these to your liking.
3)Take the exhaust and place it about 3/4 way towards the front of the truck from the 2nd door on the driver side.
4)Take a shade of gray and go one notch under the piping, and about 3 or 4 notches up to the bottom of the cab, this will be the Exhaust Hanger
5)Now you'll place a Under-Cab Body Light under the step of each door in the center.
We'll focus on the pump for a little bit..
1)When attaching the pump to the chassis, you'll see a small line seperating the pump outline and the cab outline, this would be the frame. Place the frame about 3 notches from the bottom of the cab so that the pump is symetrical.
2)You'll notice there are two crosslays, or as I call them Pre-Connects in the tray, you can color these to your liking.
3)Take the exhaust and place it about 3/4 way towards the front of the truck from the 2nd door on the driver side.
4)Take a shade of gray and go one notch under the piping, and about 3 or 4 notches up to the bottom of the cab, this will be the Exhaust Hanger
5)Now you'll place a Under-Cab Body Light under the step of each door in the center.