[quote name='chief60' date='26 February 2010 - 10:24 PM' timestamp='1267236280' post='366534']
Is this what you are looking for? The is from DCFD Seagrave spec.
Within these categories the following specific items shall be included:
Wheelbase shall be 163".
Overall height not to exceed 112"
Overall length not to exceed 340"
The top of the hose body shall be as low as possible, but shall not exceed 66" from the top of the rear step.
Entire cab shall tilt.
Seating capacity shall be provided for six (6) personnel (including driver).
Rear axle gearing shall allow a top speed of approximately 65 miles an hour.
GVW rating shall be a minimum of 44,000 lbs.
[/quote]
I noticed today while reading the DC spec used to purchase the last bunch of Seagrave pumpers, that it calls for 64" from the ground to the hose bed and 40" from the back step, however the drawings show 55" and 31" from the step, which in comparing to pictures looks to be about where they ended up. Anyone know whats up with that?
Is this what you are looking for? The is from DCFD Seagrave spec.
Within these categories the following specific items shall be included:
Wheelbase shall be 163".
Overall height not to exceed 112"
Overall length not to exceed 340"
The top of the hose body shall be as low as possible, but shall not exceed 66" from the top of the rear step.
Entire cab shall tilt.
Seating capacity shall be provided for six (6) personnel (including driver).
Rear axle gearing shall allow a top speed of approximately 65 miles an hour.
GVW rating shall be a minimum of 44,000 lbs.
[/quote]
I noticed today while reading the DC spec used to purchase the last bunch of Seagrave pumpers, that it calls for 64" from the ground to the hose bed and 40" from the back step, however the drawings show 55" and 31" from the step, which in comparing to pictures looks to be about where they ended up. Anyone know whats up with that?