Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Canadian Apparatus from the 1970's
#21
Great pictures I love the older rigs.

Dave
Reply
#22
Quebec City, Quebec

1974 Thibault Kenworth 100 ft.



Attached Files Thumbnail(s)
   
Reply
#23
Quebec City, Quebec

1962 Thibault 100 ft.

 

This was Thibault's first custom rearmount on their AWIT chassis.  They had built others using Marigus and Merryweather ladders in the 1950's on their earlier chassis.  It was also the first custom rearmount aerial in North America where the entire vehicle was built by the same manufacturer.  It was delivered with manual jacks which were replaced with hydraulic ones at some unknown date.  Montreal got a similar one in 1965 - Ladder 405.  There were only two rearmounts with this AWIT cab before Thibault switched to the Cincinnati cab.



Attached Files Image(s)
   
Reply
#24
I spent a lot of time in Vancouver, BC in the 1980's and photographed much of their apparatus.  Here are a few.  The aging fire boat J.H. Carlisle was retired in 1971 and not replaced as the False Creek area that justified is existence no longer had the high challenge lumber mills.  In its place the VFD acquired four "Super Pumpers" from King Seagrave, which were assigned to the four stations surrounding False Creek, Stations 1, 2, 3 and 4.  The units were built on Ford chassis with 350 H.P. diesel engines, 1,750 igpm single stage pumps, 300 GWT and Stang Intelli-giant guns with 2.5 and 3.5 inch tips.  At the time these were the highest capacity pumps in Canada.

 

Pump 1 - 1971 King Seagrave-Ford - 1,750/300

 



Attached Files Image(s)
   
Reply
#25
Pump 3 - 1971 King Seagrave-Ford - 1,750/300



Attached Files Image(s)
   
Reply
#26
Pump 4 - 1971 King Seagrave-Ford - 1,750/300



Attached Files Image(s)
   
Reply
#27
Pump 6 - 1974 Pierreville Imperial 1050/300



Attached Files Image(s)
   
Reply
#28
Pump 17 - 1976 Pierreville Imperial 1050/300



Attached Files Image(s)
   
Reply
#29
Pump 18 - 1980 Pierreville International 1050/500



Attached Files Image(s)
   
Reply
#30
Pump 22 - 1976 Pierreville Imperial 1050/300



Attached Files Image(s)
   
Reply
#31
Truck 4 - 1976 Pierreville Ford 250/200/100 ft.



Attached Files Image(s)
   
Reply
#32
Truck 6 - 1975 Pierreville Imperial 100 ft.



Attached Files Image(s)
   
Reply
#33
Truck 15 - 1976 Pierreville Scot 625/200/100 ft.



Attached Files Image(s)
   
Reply
#34
Truck 17 - 1976 Pierreville Scot 625/200/100 ft.



Attached Files Image(s)
   
Reply
#35
Truck 18 - 1975 Pierreville Imperial 250/200/100 ft.



Attached Files Image(s)
   
Reply
#36
Truck 22 - 1960 Lafrance Fire Engine and Foamite (Toronto) 250/200/100 ft.



Attached Files Image(s)
   
Reply
#37
Vancouver was one of the Canadian Fire Departments to acquire Calavar elevating platforms in the 1970's.  VFD had two 125 ft. units purchased in 1973 and 1976.

 

Truck 7 - 1973 Calavar 125 ft.



Attached Files Image(s)
   
Reply
#38
In 1989 VFD acquired a 131 ft. Bronto 40-2T1 platform from Anderson on a Pacific PFC410 chassis. Pacific Truck and Trailer was a Vancouver based manufacturer of HEAVY DUTY highway and off road trucks primarily for the logging industry, Their last truck was delivered in 1991 before the factory closed. 

 

In 1987 Pacific developed the PFC410 fire apparatus chassis.  Between 1988 and 1991 they sold a total of 11.  To the best of my knowledge the chassis was used on 7 Bronto Towers (Ottawa 3, Montreal 1, Vancouver 1, Rouyn-Noranda 1, Saipan 1), 3 pumps (Ottawa 2, North Vancouver 1) and one twin agent truck (Syncrude).  All the apparatus were built by Anderson.

 

Truck 2 - 1989 Anderson Pacific Bronto -/-/131 ft.



Attached Files Image(s)
   
Reply
#39
Pump 1 - 1987 Anderson Freightliner 1500/300/24



Attached Files Image(s)
   
Reply
#40
Wow, Awesome shots Ian!   Apparatus of those days were unique and had so much character.........thank you!

Reply


Bookmarks

Forum Jump:


Users browsing this thread: 2 Guest(s)